{ "translations": { "Daemon config not found" : "Daemon config not found", "Error starting install of ExApp" : "Error starting install of ExApp", "ExApp failed to register, check the NC logs" : "ExApp failed to register, check the NC logs", "ExApp not found, failed to get status" : "ExApp not found, failed to get status", "Error adding Docker registry" : "Error adding Docker registry", "Error removing Docker registry" : "Error removing Docker registry", "This app is not installed from the AppStore. No extra information available. Only enable/disable and remove actions are allowed." : "This app is not installed from the AppStore. No extra information available. Only enable/disable and remove actions are allowed.", "Could not perform installation of ExApp" : "Could not perform installation of ExApp", "Failed to enable ExApp" : "Failed to enable ExApp", "Failed to disable ExApp" : "Failed to disable ExApp", "Could not update ExApp" : "Could not update ExApp", "Error starting update of ExApp" : "Error starting update of ExApp", "Could not perform update of ExApp" : "Could not perform update of ExApp", "ExApp not found, failed to get logs" : "ExApp not found, failed to get logs", "Failed to get container logs. Note: Downloading Docker container works only for containers with the json-file or journald logging driver. Error: %s" : "Failed to get container logs. Note: Downloading Docker container works only for containers with the json-file or journald logging driver. Error: %s", "ExApp not found, failed to get deploy options" : "ExApp not found, failed to get deploy options", "AppAPI authentication failed" : "AppAPI authentication failed", "AppAPI ExApp notifier" : "AppAPI ExApp notifier", "AppAPI" : "AppAPI", "AI Integration Team" : "AI Integration Team", "ExApps Settings" : "ExApps Settings", "AppAPI deploy daemon" : "AppAPI deploy daemon", "AppAPI default deploy daemon is not set. Please register a default deploy daemon in the settings to install External Apps (Ex-Apps)." : "AppAPI default deploy daemon is not set. Please register a default deploy daemon in the settings to install External Apps (Ex-Apps).", "AppAPI default deploy daemon \"%s\" is not accessible. Please check the daemon configuration." : "AppAPI default deploy daemon \"%s\" is not accessible. Please check the daemon configuration.", "The AppAPI default deploy daemon is not using HaRP. Please consider switching to HaRP for better performance." : "The AppAPI default deploy daemon is not using HaRP. Please consider switching to HaRP for better performance.", "AppAPI HaRP version check" : "AppAPI HaRP version check", "Could not retrieve HaRP version from daemon \"%s\"" : "Could not retrieve HaRP version from daemon \"%s\"", "HaRP version for daemon \"%s\" is \"%s\", which is too old. The minimum required version is \"%s\". Please update the daemon to the latest version." : "HaRP version for daemon \"%s\" is \"%s\", which is too old. The minimum required version is \"%s\". Please update the daemon to the latest version.", "Failed to check HaRP version for daemon \"%s\": %s" : "Failed to check HaRP version for daemon \"%s\": %s", "Nextcloud AppAPI" : "Nextcloud AppAPI", "External Apps management" : "External Apps management", "Admin options saved" : "Admin options saved", "Failed to save admin options" : "Failed to save admin options", "The AppAPI Project is an exciting initiative that aims to revolutionize the way applications are developed for Nextcloud through the use of docker containers. Allowing for greater programming language choice and allowing computationally expensive tasks to be offloaded to a different server." : "The AppAPI Project is an exciting initiative that aims to revolutionize the way applications are developed for Nextcloud through the use of docker containers. Allowing for greater programming language choice and allowing computationally expensive tasks to be offloaded to a different server.", "Deploy daemons" : "Deploy daemons", "A deploy daemon (DaemonConfig) is an ExApps orchestration daemon." : "A deploy daemon (DaemonConfig) is an ExApps orchestration daemon.", "Deploy daemons. A deploy daemon (DaemonConfig) is an ExApps orchestration daemon." : "Deploy daemons. A deploy daemon (DaemonConfig) is an ExApps orchestration daemon.", "Default deploy daemon is not accessible. Please check its configuration" : "Default deploy daemon is not accessible. Please check its configuration", "ExApp init timeout (minutes)" : "ExApp init timeout (minutes)", "ExApp initialization process timeout after which AppAPI will mark it as failed" : "ExApp initialization process timeout after which AppAPI will mark it as failed", "ExApp init timeout" : "ExApp init timeout", "ExApp container restart policy" : "ExApp container restart policy", "Choose the container restart policy, e.g. 'always' to ensure ExApps will be running after a daemon server reboot" : "Choose the container restart policy, e.g. 'always' to ensure ExApps will be running after a daemon server reboot", "This settings changes are effective only for newly created containers" : "This settings changes are effective only for newly created containers", "Deploy daemon deletion confirmation" : "Deploy daemon deletion confirmation", "Are you sure you want delete the \"{name}\" deploy daemon?" : "Are you sure you want delete the \"{name}\" deploy daemon?", "Remove all ExApps installed on this daemon" : "Remove all ExApps installed on this daemon", "Cancel" : "Cancel", "Delete" : "Delete", "A \"manual-install\" deploy daemon cannot be set as default" : "A \"manual-install\" deploy daemon cannot be set as default", "Failed to save admin settings. Check the logs" : "Failed to save admin settings. Check the logs", "Password confirmation failed" : "Password confirmation failed", "Default" : "Default", "Set as default" : "Set as default", "Test deploy" : "Test deploy", "Docker registries" : "Docker registries", "Edit" : "Edit", "Daemon connection successful" : "Daemon connection successful", "Failed to connect to the daemon. Check the logs" : "Failed to connect to the daemon. Check the logs", "Failed to check connection to the daemon. Check the logs" : "Failed to check connection to the daemon. Check the logs", "Unlimited" : "Unlimited", "{size} GiB" : "{size} GiB", "{size} MiB" : "{size} MiB", "_{n} CPU_::_{n} CPUs_" : ["{n} CPU","{n} CPUs"], "Deploy daemon configuration" : "Deploy daemon configuration", "Deploy daemon configuration details" : "Deploy daemon configuration details", "Deploy daemon" : "Deploy daemon", "Default daemon. ExApps will be installed on it" : "Default daemon. ExApps will be installed on it", "The \"Manual install\" daemon is usually used for development. It cannot be set as the default daemon." : "The \"Manual install\" daemon is usually used for development. It cannot be set as the default daemon.", "ExApps installed" : "ExApps installed", "Name" : "Surname", "Protocol" : "Protocol", "Host" : "Host", "ExApp direct communication (FRP disabled)" : "ExApp direct communication (FRP disabled)", "Deploy options" : "Deploy options", "Docker network" : "Docker network", "Nextcloud URL" : "Nextcloud URL", "HaProxy password" : "HaProxy password", "GPU support" : "GPU support", "Computation device" : "Computation device", "Memory limit" : "Memory limit", "CPU limit" : "CPU limit", "Additional options" : "Additional options", "Check connection" : "Check connection", "Registered Deploy daemons list" : "Registered Deploy daemons list", "No Deploy daemons are registered" : "No Deploy daemons are registered", "Register a custom one or configure one from the available templates" : "Register a custom one or configure one from the available templates", "Register daemon" : "Register daemon", "Register ExApp in Nextcloud" : "Register ExApp in Nextcloud", "Check if the ExApp is registered in Nextcloud before deployment" : "Check if the ExApp is registered in Nextcloud before deployment", "Image pull" : "Image pull", "Check if the image is successfully pulled" : "Check if the image is successfully pulled", "Container started" : "Container started", "Check if the image successfully pulled and container is created and started" : "Check if the image successfully pulled and container is created and started", "Heartbeat" : "Heartbeat", "Check for the heartbeat is finished and healthy" : "Check for the heartbeat is finished and healthy", "Init step" : "Init step", "Wait for initialization step to finish" : "Wait for initialization step to finish", "Enabled" : "Enabled", "Check if ExApp successfully handled the enabled event and registered all stuff properly" : "Check if ExApp successfully handled the enabled event and registered all stuff properly", "Only if ExApp container is preset" : "Only if ExApp container is preset", "Deploy test passed successfully!" : "Deploy test passed successfully!", "Deploy test failed at step \"{step}\"" : "Deploy test failed at step \"{step}\"", "AppAPI will try to install small skeleton ExApp to check that the daemon is configured correctly and the deployment steps are successful." : "AppAPI will try to install small skeleton ExApp to check that the daemon is configured correctly and the deployment steps are successful.", "The following deploy test checks must succeed:" : "The following deploy test checks must succeed:", "More information" : "More information", "Download ExApp logs" : "Download ExApp logs", "Remove the test ExApp" : "Remove the test ExApp", "Start the deploy test" : "Start the deploy test", "Stop the deploy test" : "Stop the deploy test", "The test ExApp is unregistered and its container is removed on \"Stop the deploy test\"" : "The test ExApp is unregistered and its container is removed on \"Stop the deploy test\"", "Please enter a registry domain" : "Please enter a registry domain", "\"From\" cannot be \"local\"" : "\"From\" cannot be \"local\"", "This registry mapping already exists" : "This registry mapping already exists", "\"From\" and \"To\" cannot be the same" : "\"From\" and \"To\" cannot be the same", "Docker registry mapping added" : "Docker registry mapping added", "Error adding Docker registry mapping" : "Error adding Docker registry mapping", "Docker registry mapping removed" : "Docker registry mapping removed", "Error removing Docker registry mapping" : "Error removing Docker registry mapping", "Override Docker registries" : "Override Docker registries", "Configure Docker registry override mappings for the selected daemon." : "Configure Docker registry override mappings for the selected daemon.", "The matching source registry in ExApp info.xml will be overwritten during deployment (image pull step)." : "The matching source registry in ExApp info.xml will be overwritten during deployment (image pull step).", "This is useful if you want to use a custom Docker registry, for example, to use a private Docker registry, or to use a different Docker registry for testing." : "This is useful if you want to use a custom Docker registry, for example, to use a private Docker registry, or to use a different Docker registry for testing.", "Image pull will be skipped" : "Image pull will be skipped", "Remove" : "Remove", "No custom Docker registries are registered" : "No custom Docker registries are registered", "Add registry override mapping" : "Add registry override mapping", "From" : "From", "registry URL (e.g. ghcr.io)" : "registry URL (e.g. ghcr.io)", "To" : "To", "registry URL (e.g. docker.io)" : "registry URL (e.g. docker.io)", "Add" : "Add", "Hostname used by Nextcloud to access the ExApps" : "Hostname used by Nextcloud to access the ExApps", "The hostname (and port) at which the {name} is available. This does not need to be a public host, just a host accessible by the Nextcloud server, e.g. {host}." : "The hostname (and port) at which the {name} is available. This does not need to be a public host, just a host accessible by the Nextcloud server, e.g. {host}.", "The hostname (and port) or path at which the {name} is available. This does not need to be a public host, just a host accessible by the Nextcloud server. It can also be the path to the Docker socket. (e.g. nextcloud-appapi-dsp:2375, /var/run/docker.sock)" : "The hostname (and port) or path at which the {name} is available. This does not need to be a public host, just a host accessible by the Nextcloud server. It can also be the path to the Docker socket. (e.g. nextcloud-appapi-dsp:2375, /var/run/docker.sock)", "A daemon with this name already exists" : "A daemon with this name already exists", "The secret key for the HaRP container communication (HP_SHARED_KEY)." : "The secret key for the HaRP container communication (HP_SHARED_KEY).", "AppAPI Docker Socket Proxy authentication password" : "AppAPI Docker Socket Proxy authentication password", "Changes are only effective for newly installed ExApps. For existing ExApps, the Docker containers should be recreated to apply the new settings values." : "Changes are only effective for newly installed ExApps. For existing ExApps, the Docker containers should be recreated to apply the new settings values.", "The Docker network that the deployed ExApps will use." : "The Docker network that the deployed ExApps will use.", "The URL should start with http:// or https://" : "The URL should start with http:// or https://", "For a HTTPS daemon, the Nextcloud URL should be HTTPS" : "For a HTTPS daemon, the Nextcloud URL should be HTTPS", "All available GPU devices on the daemon host need to be enabled in ExApp containers by Docker." : "All available GPU devices on the daemon host need to be enabled in ExApp containers by Docker.", "DaemonConfig successfully registered" : "DaemonConfig successfully registered", "Failed to register DaemonConfig. Check the logs" : "Failed to register DaemonConfig. Check the logs", "DaemonConfig successfully updated" : "DaemonConfig successfully updated", "Failed to update DaemonConfig. Check the logs" : "Failed to update DaemonConfig. Check the logs", "Failed to connect to Daemon. Check the logs" : "Failed to connect to Daemon. Check the logs", "Failed to check connection to Daemon. Check the logs" : "Failed to check connection to Daemon. Check the logs", "Edit the deploy daemon" : "Edit the deploy daemon", "Register a new deploy daemon" : "Register a new deploy daemon", "Daemon configuration template" : "Daemon configuration template", "Select a daemon configuration template" : "Select a daemon configuration template", "Daemon registration form" : "Daemon registration form", "Unique deploy daemon name" : "Unique deploy daemon name", "Unique deploy Daemon name" : "Unique deploy Daemon name", "Display name" : "Display name", "Deployment method" : "Deployment method", "Select the daemon deploy method" : "Select the daemon deploy method", "HaRP host" : "HaRP host", "Daemon host" : "Daemon host", "HaRP shared key" : "HaRP shared key", "The password must be at least 12 characters long" : "The password must be at least 12 characters long", "Set this daemon as the default one" : "Set this daemon as the default one", "Set as the default daemon" : "Set as the default daemon", "Enable HTTPS" : "Enable HTTPS", "Show deploy options" : "Show deploy options", "Hide deploy options" : "Hide deploy options", "Enable HaRP" : "Enable HaRP", "FRP server address" : "FRP server address", "The address (host:port) of the FRP server that should be reachable by the ExApp in the network defined in the 'Docker network' section." : "The address (host:port) of the FRP server that should be reachable by the ExApp in the network defined in the 'Docker network' section.", "Docker socket proxy port" : "Docker socket proxy port", "The port in HaRP which the Docker socket proxy connects to. This should be exposed but for the in-built one, it is not required to be exposed or changed." : "The port in HaRP which the Docker socket proxy connects to. This should be exposed but for the in-built one, it is not required to be exposed or changed.", "Disable FRP" : "Disable FRP", "Flag for advanced setups only. Disables the FRP tunnel between ExApps and HaRP." : "Flag for advanced setups only. Disables the FRP tunnel between ExApps and HaRP.", "Docker network for ex-app deployment must be defined" : "Docker network for ex-app deployment must be defined", "Compute device" : "Compute device", "Memory limit (in MiB)" : "Memory limit (in MiB)", "Must be a positive integer" : "Must be a positive integer", "Maximum amount of memory that the ExApp container can use in mebibytes" : "Maximum amount of memory that the ExApp container can use in mebibytes", "CPU limit as decimal value" : "CPU limit as decimal value", "Must be a positive number" : "Must be a positive number", "Maximum number of CPU cores that the ExApp container can use (e.g. 0.5 for half a core, 2 for two cores)" : "Maximum number of CPU cores that the ExApp container can use (e.g. 0.5 for half a core, 2 for two cores)", "Add additional option" : "Add additional option", "Option key (unique)" : "Option key (unique)", "Option key (unique, e.g. my_key)" : "Option key (unique, e.g. my_key)", "Option key is required" : "Option key is required", "Option value" : "Option value", "Option value is required" : "Option value is required", "Confirm" : "Confirm", "Save" : "Save", "Register" : "Register", "External Apps" : "External Apps", "### Boost your Nextcloud with AppAPI and its specially designed applications.\n\n\nThe AppAPI is a project within the Nextcloud ecosystem designed to streamline and enhance the process of\napplication development, deployment, and management.\n\nIt introduces a new methodology that allows developers to create\napplications using a variety of programming languages, not limited to PHP, which was traditionally used in Nextcloud development.\n\n### Bundled App\n\n**Starting with Nextcloud 30.0.1, this application is included in the default Nextcloud package.**\n\n### Support\n\nWe appreciate any support for this project:\n\n- ⭐ Star our work on GitHub\n- ❗ Create an Issue or feature request\n- 💁 Resolve an Issue and create a Pull Request\n- 🧑‍💻 Develop your own application using AppAPI\n\nWe are genuinely excited about the future of the AppAPI project and its potential to transform\nthe way applications are developed and experienced within Nextcloud.\n\nAs we embark on this journey, we warmly invite you - developers, thinkers, creators, and visionaries -\nto join us in shaping a more versatile, stable, and secure app landscape.\n\n*Your insights, suggestions, and contributions are invaluable to us.*" : "### Boost your Nextcloud with AppAPI and its specially designed applications.\n\n\nThe AppAPI is a project within the Nextcloud ecosystem designed to streamline and enhance the process of\napplication development, deployment, and management.\n\nIt introduces a new methodology that allows developers to create\napplications using a variety of programming languages, not limited to PHP, which was traditionally used in Nextcloud development.\n\n### Bundled App\n\n**Starting with Nextcloud 30.0.1, this application is included in the default Nextcloud package.**\n\n### Support\n\nWe appreciate any support for this project:\n\n- ⭐ Star our work on GitHub\n- ❗ Create an Issue or feature request\n- 💁 Resolve an Issue and create a Pull Request\n- 🧑‍💻 Develop your own application using AppAPI\n\nWe are genuinely excited about the future of the AppAPI project and its potential to transform\nthe way applications are developed and experienced within Nextcloud.\n\nAs we embark on this journey, we warmly invite you - developers, thinkers, creators, and visionaries -\nto join us in shaping a more versatile, stable, and secure app landscape.\n\n*Your insights, suggestions, and contributions are invaluable to us.*", "The AppAPI Project is an exciting initiative that aims to revolutionize the way applications are developed for Nextcloud." : "The AppAPI Project is an exciting initiative that aims to revolutionize the way applications are developed for Nextcloud.", "Deploy Daemons" : "Deploy Daemons", "Deploy Daemon (DaemonConfig) is an ExApps orchestration daemon." : "Deploy Daemon (DaemonConfig) is an ExApps orchestration daemon.", "Deploy Daemons. Deploy Daemon (DaemonConfig) is an ExApps orchestration daemon." : "Deploy Daemons. Deploy Daemon (DaemonConfig) is an ExApps orchestration daemon.", "Default Deploy Daemon is not accessible. Please verify its configuration" : "Default Deploy Daemon is not accessible. Please verify its configuration", "Specify container restart policy, e.g. 'always' to ensure ExApp running after daemon server reboot" : "Specify container restart policy, e.g. 'always' to ensure ExApp running after daemon server reboot", "This settings changes are reflected only for newly created containers" : "This settings changes are reflected only for newly created containers", "{license}-licensed" : "{license}-licensed", "Update to {version}" : "Update to {version}", "Delete data on remove" : "Delete data on remove", "This app has no minimum Nextcloud version assigned. This will be an error in the future." : "This app has no minimum Nextcloud version assigned. This will cause an error in the future.", "This app has no maximum Nextcloud version assigned. This will be an error in the future." : "This app has no maximum Nextcloud version assigned. This will cause an error in the future.", "This app cannot be installed because the following dependencies are not fulfilled:" : "This app cannot be installed because the following dependencies are not fulfilled:", "View in store" : "View in store", "Visit website" : "Visit website", "Report a bug" : "Report a bug", "User documentation" : "User documentation", "Admin documentation" : "Admin documentation", "Developer documentation" : "Developer documentation", "This app is not registered in AppStore. No extra information available. Only enable/disable and remove actions are allowed." : "This app is not registered in AppStore. No extra information available. Only enable/disable and remove actions are allowed.", "This app is supported via your current Nextcloud subscription." : "This app is supported via your current Nextcloud subscription.", "Supported" : "Supported", "Featured apps are developed by and within the community. They offer central functionality and are ready for production use." : "Featured apps are developed by and within the community. They offer central functionality and are ready for production use.", "Featured" : "Featured", "Update to {update}" : "Update to {update}", "All ExApps are up-to-date." : "All ExApps are up-to-date.", "Default Deploy daemon is not accessible" : "Default Deploy daemon is not accessible", "Icon" : "Icon", "Version" : "Version", "Daemon" : "Daemon", "Level" : "Level", "Actions" : "Actions", "Results from other categories" : "Results from other categories", "No apps found" : "No apps found", "_%n ExApp has an update available_::_%n apps have an update available_" : ["%n ExApp has an update available","%n apps have an update available"], "_Update_::_Update all_" : ["Update","Update all"], "Deploy Daemon" : "Deploy Daemon", "Type" : "Type", "Display Name" : "Display Name", "GPUs support" : "GPUs support", "Are you sure you want delete Deploy Daemon" : "Are you sure you want delete Deploy Daemon", "All ExApps on this daemon will be removed" : "All ExApps on this daemon will be removed", "All ExApps installed on this daemon will be removed" : "All ExApps installed on this daemon will be removed", "\"manual-install\" Deploy Daemon cannot be set as default" : "\"manual-install\" Deploy Daemon cannot be set as default", "Failed to save admin options. Check the logs" : "Failed to save admin options. Check the logs", "Deploy daemon config details" : "Deploy daemon config details", "Manual install daemon usually used for development. It cannot be set as default daemon." : "Manual install daemon usually used for development. It cannot be set as default daemon.", "Deploy config" : "Deploy config", "Verify connection" : "Verify connection", "No Deploy daemons configured" : "No Deploy daemons configured", "Register a custom one or setup from available templates" : "Register a custom one or setup from available templates", "Register Daemon" : "Register Daemon", "AppAPI will try to install small skeleton ExApp to verify Daemon configured correctly and deployment steps are passing." : "AppAPI will try to install small skeleton ExApp to verify Daemon configured correctly and deployment steps are passing.", "The following Deploy test checks must be passed to succeed:" : "The following Deploy test checks must be passed to succeed:", "More info" : "More info", "Remove test ExApp" : "Remove test ExApp", "Start Deploy test" : "Start Deploy test", "Stop Deploy test" : "Stop Deploy test", "ExApp is unregistered and container is removed on \"Stop deploy test\"" : "ExApp is unregistered and container is removed on \"Stop deploy test\"", "Hostname to access ExApps" : "Hostname to access ExApps", "Hostname or path to access Docker daemon (e.g. nextcloud-appapi-dsp:2375, /var/run/docker.sock)" : "Hostname or path to access Docker daemon (e.g. nextcloud-appapi-dsp:2375, /var/run/docker.sock)", "Daemon with this name already exists" : "Daemon with this name already exists", "Password must be at least 12 characters long" : "Password must be at least 12 characters long", "With https enabled network is set to host" : "With https enabled network is set to host", "Changes would be applied only for newly installed ExApps. For existing ExApps, Docker containers should be recreated." : "Changes would be applied only for newly installed ExApps. For existing ExApps, Docker containers should be recreated.", "URL should start with http:// or https://" : "URL should start with http:// or https://", "For HTTPS daemon, Nextcloud URL should be HTTPS" : "For HTTPS daemon, Nextcloud URL should be HTTPS", "All available GPU devices on daemon host will be requested to be enabled in ExApp containers by Docker." : "All available GPU devices on daemon host will be requested to be enabled in ExApp containers by Docker.", "Edit Deploy Daemon" : "Edit Deploy Daemon", "Register Deploy Daemon" : "Register Deploy Daemon", "Select daemon configuration template" : "Select daemon configuration template", "Unique Deploy Daemon Name" : "Unique Deploy Daemon Name", "Select daemon deploy method" : "Select daemon deploy method", "Set daemon as default" : "Set daemon as default", "Set as default daemon" : "Set as default daemon", "Enable https" : "Enable https", "Show deploy config" : "Show deploy config", "Hide deploy config" : "Hide deploy config", "Network" : "Network", "Docker network name" : "Docker network name", "Additional option" : "Additional option", "by {author}\n{license}" : "by {author}\n{license}", "Your apps" : "Your apps", "Documentation" : "Documentation", "Details" : "Details", "Changelog" : "Changelog", "Active apps" : "Active apps", "Disabled apps" : "Disabled apps", "Updates" : "Updates", "Featured apps" : "Featured apps", "Supported apps" : "Supported apps", "manual-install apps cannot be updated" : "manual-install apps cannot be updated", "{progress}% Deploying" : "{progress}% Deploying", "{progress}% Initializing" : "{progress}% Initializing", "Healthchecking" : "Healthchecking", "Deploy and Enable" : "Deploy and Enable", "Enable" : "Enable", "Disable" : "Disable", "Allow untested app" : "Allow untested app", "Default Deploy daemon is not accessible. Please verify configuration" : "Default Deploy daemon is not accessible. Please verify configuration", "The app will be downloaded from the App Store and deployed on default Deploy Daemon" : "The app will be downloaded from the App Store and deployed on default Deploy Daemon", "This app is not marked as compatible with your Nextcloud version. If you continue you will still be able to install the app. Note that the app might not work as expected." : "This app is not marked as compatible with your Nextcloud version. If you continue you will still be able to install the app. Note that the app might not work as expected.", "Your ExApps" : "Your ExApps", "An error occurred during the request. Unable to proceed." : "An error occurred during the request. Unable to proceed.", "The app has been enabled but needs to be updated." : "The app has been enabled but needs to be updated.", "Error: This app cannot be enabled because it makes the server unstable" : "Error: This app cannot be enabled because it makes the server unstable", "### Boost your Nextcloud with AppAPI and its specially designed applications.\n\n\nThe AppAPI is a project within the Nextcloud ecosystem designed to streamline and enhance the process of\napplication development, deployment, and management.\n\nIt introduces a new methodology that allows developers to create\napplications using a variety of programming languages, not limited to PHP, which was traditionally used in Nextcloud development.\n\n\n### List of applications that require AppAPI:\n\n- [talk_bot_ai_example](https://github.com/cloud-py-api/talk_bot_ai_example)\n- [upscaler_example](https://github.com/cloud-py-api/upscaler_example)\n- [image_to_text_example](https://github.com/cloud-py-api/file_to_text_example)\n- [ai_image_generator_bot](https://github.com/cloud-py-api/ai_image_generator_bot)\n- [SummarAI](https://github.com/nextcloud/sumupbot)\n\n_If you wish to develop an application, we will gladly help and assist you._\n\n### Support\n\nWe appreciate any support for this project:\n\n- ⭐ Star our work on GitHub\n- ❗ Create an Issue or feature request\n- 💁 Resolve an Issue and create a Pull Request\n- 🧑‍💻 Develop your own application using AppAPI\n\nWe are genuinely excited about the future of the AppAPI project and its potential to transform\nthe way applications are developed and experienced within Nextcloud.\n\nAs we embark on this journey, we warmly invite you - developers, thinkers, creators, and visionaries -\nto join us in shaping a more versatile, stable, and secure app landscape.\n\n*Your insights, suggestions, and contributions are invaluable to us.*" : "### Boost your Nextcloud with AppAPI and its specially designed applications.\n\n\nThe AppAPI is a project within the Nextcloud ecosystem designed to streamline and enhance the process of\napplication development, deployment, and management.\n\nIt introduces a new methodology that allows developers to create\napplications using a variety of programming languages, not limited to PHP, which was traditionally used in Nextcloud development.\n\n\n### List of applications that require AppAPI:\n\n- [talk_bot_ai_example](https://github.com/cloud-py-api/talk_bot_ai_example)\n- [upscaler_example](https://github.com/cloud-py-api/upscaler_example)\n- [image_to_text_example](https://github.com/cloud-py-api/file_to_text_example)\n- [ai_image_generator_bot](https://github.com/cloud-py-api/ai_image_generator_bot)\n- [SummarAI](https://github.com/nextcloud/sumupbot)\n\n_If you wish to develop an application, we will gladly help and assist you._\n\n### Support\n\nWe appreciate any support for this project:\n\n- ⭐ Star our work on GitHub\n- ❗ Create an Issue or feature request\n- 💁 Resolve an Issue and create a Pull Request\n- 🧑‍💻 Develop your own application using AppAPI\n\nWe are genuinely excited about the future of the AppAPI project and its potential to transform\nthe way applications are developed and experienced within Nextcloud.\n\nAs we embark on this journey, we warmly invite you - developers, thinkers, creators, and visionaries -\nto join us in shaping a more versatile, stable, and secure app landscape.\n\n*Your insights, suggestions, and contributions are invaluable to us.*" },"pluralForm" :"nplurals=2; plural=(n != 1);" }